Zhejiang Ailipu Technology Co., Ltd.
Mechanical Diaphragm Dosing Pump
Hydraulic Diaphragm Metering Pump
$1593≥1Set/Sets
| Payment Type: | L/C,T/T |
| Incoterm: | FOB,CFR,CIF |
| Min. Order: | 1 Set/Sets |
| Transportation: | Ocean,Air |
Model No.: JYM 3.0
Brand: AILIPU
Material: Cast Iron
Power: Hydraulic
Valve Body Type: Direct Single-Seat
Function: Electronic Type
Liquid Media: Viton
Performance: No Leak
Voltage: 380V
Warranty: 12 Month
Certificate: CE Certificate
Pump Body Material: Cast Iron
Pump Head Material: Stainless Steel
Pump Type: Hydraulic
Usage: Oil...
Model: JYM 3.0
| Selling Units | : | Set/Sets |
| Package Type | : | Strong wooden package suitable for long distance transportation |
Application
Hydraulic Metering Pump either can be manual control and automatic control, whether in stroke rate or stroke length. And, after those year's development, the life time of these metering pump is increase and become more stable , durable and efficient.
It can be applied in a wide range from the general water of normal temperature to some liquid which are strong corrosive, volatile, crystallised, combustible, and explosive, extremely toxic, foul-smelling, moderately viscous, radioactive and other valuable liquid. Meanwhile, it can also transfer some suspending liquid. In order to prevent the accidents caused by the mix of the media and hydraulic oil, or in terms of some liquid which are combustible, explosive, toxic and valuable, the double diaphragm hydraulic metering pumps with the alarm functions for the rupture of diaphragms can be applied.
* No dynamic seal, no leakage and easy maintenance
* The working pressure can be up to 80 MPa; the measurement accuracy can be up to +/- 1%; the capacity range of the simplex pump: 0.2L/H - 12000L/H
* The control of the capacity flow is by adjusting of the length of the stroke and the frequency conversion; meanwhile, the remote automatic control can be available when there is the stroke Controller or the frequency changer installed.
* The working temperature of the medium should neither exceed 200℃ nor below -30℃; otherwise it wil influence the life of the diaphragm
* The new three-valve structure and the application of limit oil compensating mechanism not only ensure the fullness of hydraulic oil in the hydraulic working chamber but also avoid filling oil excessively and prevent hydraulic shock so that make the both sides of the diaphragm have balanced force and increase the working life of the diaphragm to more than 8000H.
|
| Capacity | Pressure | Plunger Dia. | | Speed | Power | Inlet / Outlet Dia. (MM) | Weight (kg) |
| JYM3.0-6/35 | 6 | 35 | 10 | 28 | 96 | 1.1 | 8 | 90 |
| JYM3.0-10/30 | 10 | 30 | 140 | 1.1 | ||||
| JYM3.0-16/25 | 16 | 25 | 12 | 1.1 | ||||
| JYM3.0-20/15 | 20 | 15 | 0.75 | |||||
| JYM3.0-25/15 | 25 | 15 | 16 | 96 | 1.1 | |||
| JYM3.0-25/10 | 25 | 10 | 0.75 | |||||
| JYM3.0-36/12.5 | 36 | 12.5 | 140 | 1.1 | ||||
| JYM3.0-36/8 | 36 | 8 | 0.75 | |||||
| JYM3.0-42/9 | 42 | 9 | 20 | 96 | 1.1 | 15 | ||
| JYM3.0-42/6.3 | 42 | 6.3 | 0.75 | |||||
| JYM3.0-63/8 | 63 | 8 | 140 | 1.1 | ||||
| JYM3.0-63/5 | 63 | 5 | 0.75 | |||||
| JYM3.0-76/7 | 76 | 7 | 22 | 1.1 | ||||
| JYM3.0-76/4.5 | 76 | 4.5 | 0.75 | |||||
| JYM3.0-100/4 | 100 | 4 | 25 | 1.1 | ||||
| JYM3.0-100/2.5 | 100 | 2.5 | 0.75 | |||||
| JYM3.0-120/3.6 | 120 | 3.6 | 32 | 96 | 1.1 | |||
| JYM3.0-120/2.5 | 120 | 2.5 | 0.75 | |||||
| JYM3.0-170/3.2 | 170 | 3.2 | 140 | 1.1 | ||||
| JYM3.0-170/2.2 | 170 | 2.2 | 0.75 | |||||
| JYM3.0-210/2.5 | 210 | 2.5 | 36 | 1.1 | 20 | |||
| JYM3.0-210/1.6 | 210 | 1.6 | 0.75 | |||||
| JYM3.0-270/2 | 270 | 2 | 40 | 1.1 | ||||
| JYM3.0-270/1.3 | 270 | 1.3 | 0.75 | |||||
| JYM3.0-300/1.6 | 300 | 1.6 | 45 | 1.1 | ||||
| JYM3.0-300/1.0 | 300 | 1.0 | 0.75 | |||||
| JYM3.0-420/1.0 | 420 | 1.0 | 50 | 1.1 | 25 | |||
| JYM3.0-420/0.63 | 420 | 0.63 | 0.75 |
** The capacity up to 3600 LPH
** The maximum pressure up to 500 bar
** Measuring accuracy reaches to -/+1%
** Temperatures of liquid shall be between -30 degree to 100 degree
** Max.Suct: 8m
** Manual adjustment of the stroke
**Digital Controller(accepts 4~20mA signal to adjust the motor speed to control the output)
A: We are factory, and our factory has the independent research and development capacity
A: Generally it is 3 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer sample but it must be paid
A:TT, LC. etc.....
About Us
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now